There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
http://www.off-road.com/trucks4x4/bigbroncos.tech/Bronco-Rear-Axle-Codes-and-Ratios/ArticleStandard/Article/detail/304644your gear ratio is 3.55
3.55 gears
3.55 gears
2.73
most likely 3.54 but look for the tag on the axle.
most 1992 Eddie Bauer bronco's are 3.55 in the rear and 3.54 in the front. that's what mine is with a 351w (5.8).
yes
The gear ratio of a train, also known as its speed ratio, is the ratio of the angular velocity of the input gear to the velocity of the output gear. The gear ratio is very important when it comes to physics.
There are three ways to find a gear ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
Incorrect gear ratio in first gear.Incorrect gear ratio in first gear.
I have an '89 Bronco XLT, it has a 25 gallon tank
The ratio is the driven gear divided by the driver gear. This determines the gear ratio.