I believe that knob is held on by a very small pin that you should see going straight thru the knob. It may look like nothing at all but that's the pin holding the knob in place. If it's there it can be knocked out, you just have to use something small enough to go through the hole as you knock it through and out with a hammer. Once enough of the pin comes out the other end it can be pulled out the rest of the way with pliers. The new pin will have to be knocked in the same way the old one came out.
To remove the window knob,you need to purchase a tool at any auto parts store, you would then slide the tool behind the window crank and simply push out the clip that holds the window lever in place.
To remove the gear shift knob on the SLK 320, first pry the cover from the gear shift knob. Then, use a screwdriver to remove the screw in the center of the knob. This will then allow the knob to be removed.
there is a clip on the handle you have have the knob faceing upward and use a flashlight and a butter knife to remove. The clip is u shaped.
how do i remove Chevy aveo 2006 shifter knob
remove the door handle and window crank (you can use a coat hanger to remove the clip) remove the door lock knob. Then reach down at the bottom and pull out the panel. Install in the same order.
To remove the gear shift knob on the '03 Silverado, first pry off the cover that has the shift pattern on it. Then, remove the screw that is under that cover to remove the knob.
To change the check engine light bulb on a 1996 Crown Victoria you need to remove the molding from around the instrument panel. Next, remove the headlight knob and shafts. Locate the light bulb and turn counterclockwise to remove. Reverse directions to replace with a new bulb.
Most have a retaining clip atached to the back of the knob that can be removed with a screw driver. Here is the instruction: 1:Block the front wheels with wheel chocks for safety. Set the parking brake and move the shift knob all the way down. Turn the ignition off and remove the key. 2:Pull the leather shift cover down to access the small clip at the front of the shift knob (it's not necessary to pull it all the way down--only an inch or two). 3:Grasp the clip with a pair of pliers. Pull it forward to remove it from the shift knob. 4:Grasp the shift knob. Pull it straight up to remove it from the shift assembly.
How do you remove the gear shift knob on a 2000 Daewoo Lanos?
remove arm rest screws, remove window crank handle( using small hook pull clip behind handle toward knob), remove door lock knob, remove door handle frame, using flat screwdriver wrapped in tape and starting at the bottom of the door gently pry the trim panel away from the door ( plastic clips are tough sometimes) and work around till all are out, lift panel off door.
First remove the shift knob pattern (it can be pried out with a small screw driver). Next remove the alignment pin with a pair of pliers. Then the shift knob can be unscrewed.
To remove the shift knob on the 1999 Olds Intrigue look for the pin that is holding the knob in place. Remove the pin and pull up on the knob, replace kob and pin.