If you are talking about the ignition lock cylinder, turn the key to the accessory position, insert a paper clip into the little hole on the face of the lock cylinder to release the lock pin, turn the key a little further in a counter clock-wise direction and the lock cylinder will pull out. If you are talking about a door lock cylinder, remove the door panel, roll the window all the way up, pop the little clip loose on the lock rod that is hooked to the back of the cylinder and remove the rod from the lock arm, then pull the 'C' clip out that is holding the lock cylinder in place and push the lock cylinder out.
How I can replace ignition switch cylinder from Isuzu Rodeo?.
What model?
Replace the lock cylinder
How do I replace an Ignition in a 1970 Maverick
Remove the retaining ring at the top of your Chevy S 10 ignition lock cylinder. Slide the ignition lock cylinder out. Remove the wiring harness from the back of the ignition lock cylinder. Reverse the process to install the new ignition lock cylinder.
Begin by removing the retaining ring at the top of your 1994 Ford ignition lock cylinder. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the ignition lock cylinder. Reverse the process to install your new ignition lock cylinder.
The ignition lock switch is found under the steering column on a 2004 Honda Civic. Remove the steering column and ignition switch. Loosen the mounting screws that hold the cylinder in place. Pull and replace the lock cylinder.
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.
== ==
Pay someone to do it.
Begin by removing the retaining ring at the top of your 1996 Chevrolet Silverado ignition lock cylinder. Slide the ignition lock out and remove the wiring harness. Reverse the process to install your new ignition lock cylinder.