This light serves a dual purpose on most cars.
- Indicates that the handbrake has been applied
- Indicates that there is a problem with the braking system
The latter requires one to have their brake systems checked by a professional.
Maybe you are mistaken. Camry starting from 1999 has automatic head lights, which basically means that your head lights and rear lights are always on evev if it's dark outside.
if it is a RED brake light on the dash that comes on when you mash the brake pedal , this is indicating a hydralic failure , uselly from low brake fluid caused by leaking master cylinder or calipers or wheel cylinders hope this helps J
check brake light fuse and brake light switch on pedal
You can access the middle brake light from the inside of your 2000 Dodge Neon cargo compartment. Remove the brake light wiring harness. Remove the brake light retaining bolts. Reverse the process to install the new brake light.
If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.
It probably means that there is a problem with the electrical connection between the brake ligts and the brake pad and so it does not light when one brakes. Another possibility is that there could be a real serious defect in the braking system e.g. the brake fluid tubes.AnswerIt means a lot of things, but the most common and simplest is that one of the brake light bulbs burned out. Honda puts two in each brake light so you don't get rear-ended on the freeway or pulled over by the cops before you can get to the auto parts store, but check your brake lights by pulling each bulb, inspecting it and cleaning the socket. It could also mean the brake fluid is low. The most common reason for this is that the brake fluid in the reservoir goes down as your brake pads wear our. Warn pads often result in low fluid and a brake warning light. Check your fluid level. If its low don't fill it. First, check your brake pads front and rear to see if they are worn out. If you fill the reservoir and then replace the pads, you will spill fluid out of the reservoir when you push the pistons back in the calipers.The other most common brake light indication is if the emergency (parking) brake is engaged. Check to make sure it is released.I have to disagree with the second answer. Normal brake wear will NOT cause a lower fluid level. The brake indicator on usually always means low fluid in the brake system. Blown light bulbs in the brake circuit will NOT cause a brake light to come on. It is only something directly related to the brake system. Brake Fluid is the monitored component in the brake system. It also will give an ABS light with LOW FLUID,,,,possibly indicating a leak.
This either means that your emergency brake (hand brake) is on, the light switch needs to be fixed, OR (most common) you need to add more brake fluid. Always check your brake fluid first!
you ask it to stop
If your handbrake is on or if the brake fluid level in the brake master cylinder in your engine compartment is LOW , the " brake " light in your dash will light up
ive put in brake fuild oil toped that up checked the battery level all ok still the battery light and hand brake light are still on...
Check the brake fluid level, as on many vehicles the "emergency brake" (in the UK, Hand-brake) warning light also acts as a warning light for low brake-fluid.
I have a 1800 vectra and the break light comes on when traveling then goes off, is this the brake shoes or pads wearing out.
The brake light switch has failed
The red " BRAKE " light in your dash comes on if the parking brake / emergency brake is on and also if the BRAKE FLUID LEVEL in the brake master cylinder located in your engine compartment is LOW
No , the rear brake lights do not turn on when you use your parking brake , just the brake light on your dash is supposed to come on
the light would be your emergency brake light meaning either your hand brake is on or that your abs has been disabled.
Brake light switch is stuck or out of adjustment.
The brake light switch is located beneath the dashboard. The switch is on the left-hand side of the drivers side.