what is the torque setting for the head bolts on a 2007 chevy malibu with a 2.2L engine
Check www.60degreev6.com -Kyle slipdunk2@hotmail.com
22 ft lbs
14 ft lbs per bold but tighten in a zig zag pattern or you will crack the aluminum.
10mm bolts torque to 18 Ft-lbs 12mm bolts torque to 22 Ft-lbs
The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.
22 ft lbs
Initial Installation (NEW Cylinder Head) 30 Nm 22 lb ft All Subsequent Installations 15 Nm 11 lb ft
22 ft. lbs.
22 ft lbs
20-22 ft lbs.
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
first you tighten them all to 22 in-lbs, then the short bolts get turned an additional 67 degrees and the medium length to long bolts an additional 80 degrees.