Want this question answered?
161 lumens I believe the above answer to be inaccurate. It depends on the light source. For example: For an incandescent light bulb 1 watt it is approx. 18 Lumens. However most LED's use only about 10% the wattage to produce the same amount of light. So for LED's .1 watt produces 18 Lumens.
A 60 watt light bulb is a light bulb with 60 watts capacity. When talking about watts, you're talking about the power that is transferred from the appliance to the accessories. Therefore, the light bulb labeled "60 watts" takes 60 watts to light up. A 60 watt light bulb will not be as bright as a 120 watt light bulb.
"A standard light bulb I would consider to be a 60 watt light bulb, and kilowatts are the amount of usage in a light bulb. From my research I have found that a standard 60 watt light bulb uses approximately 1.44 Kilowatts per hour."
What are the uses of Heat energy
The maximum lumens that a 1-watt LED flashlight can have now is 160.
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
hps light averages 125 lumens, therefore, a 150 watt hps light is about 18,750 lumens.
55-watt
Its about the Same as a 311 watt light bulb
around 21,000 average 100 watt bulb is around 1400 lumens. That's 14 lumens per watt. 14X1,500 = 21,000
This is a bit less light than a 40W incandescent bulb (much less than a 9-watt CFL bulb, but twice as much as a 5-watt CFL mini-bulb).
Bulb brightness is measured in lumens which express the amount of light produced, while the electric power used is measured in watts. The typical efficiency of some different types of bulb is: Incandescent 12 lumens per watt Halogen 17 lumens per watt CFL (compact fluorescent) 50-60 lumens/watt LED (light-emitting diodes) 90-100 lumens/watt.
The number of lumens produced by a 34 watt bulb depends on the type of bulb. As a general estimation, a standard incandescent bulb produces around 400-500 lumens per 40 watts, so a 34 watt bulb would likely produce slightly fewer lumens, around 350-450 lumens. However, different bulb technologies such as LED or CFL can produce a higher number of lumens with lower wattage.
No. 480 lumens is about the output of a 40 watt light bulb, and that will not make a very good flood light.
A 400 watt Mercury vapor light bulb produces roughly 23,000 lumens. In comparison to a 400 watt metal haloid and or high-pressure sodium, not as good. Metal haliod and high-pressure sodium produces 30,000 lumens.
A 150-watt light bulb uses energy at the rate of 150 watts, when it's turned on.
Incandescent bulbs give about 10 lumens of light per watt of electric power Halogens give about 13 lumens per watt CFLs give about 50 lumens per watt So it depends on the type of bulb.