The STX38 fuses are easy to find on a tractor. The fuses are located under the hood.
in the engine lol
stx 38 fly wheel
Open the hood and look on both sides near the hinges. There is a spring on each side. Grab the motor end of the spring and pull the end off of the bracket. Once you have both springs removed, lower the hood about 3/4 of the way and pull the bottom front of the hood forward off the hinges.
The STX38 uses standard 10-30 (any brand).
Fram PH7575 is what I use on my STX38.
how do i check the hydro transmisson fluid on a stx38
remove hood from escort xr3i
lift the hood remove the shocks first then remove the bolts holding the hood to the hinges make shur you have someone to help you with this so that you dont hurt yourself or the car
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.
Should be two people doing this as the hood is quite large and difficult to handle. Open hood Remove lines to nozzles Remove bolts holding it onto the hinges on either side Remove hood
If you open the hood, there are 5 small nuts that hold that hood molding in place. simply remove those and you can remove/replace the hood molding.