Electric current from the battery goes to solenoid, it clicks in and connects the full power of battery to starter main terminal, this spins the starter motor over, the starter Bendix gear on the end of the motor shaft spins around and forward about an inch to engage the gearing on the rim of the flywheel. This turns and when speed is up it throws the starter gear back to it's rest position.
nothing
You can use a wire instead of the starter to test the tubes .. I did it, it works !
That is not anywhere near enough information to make a determination about the status of the starter. Could be the starter, but could be the starter solenoid, wiring problems or even the ignition switch.
A DOL or direct on line starter works by connecting the motor terminals directly to the power supply when they are energized. A DOL starter is the simplest type of motor starter.
your batterie, the pos. cable run to a relay then to the starter. its called a starter relay its usually an the same side as the batt. on the fender, follow your batt. cables
just give it a positive 12v before the starter and after it it will crank after and before if it works
If the kick starter works, but only works sporadically, but the electric starter won't work at all, this usually means that the starter assembly is bad. The kick start is able to generate enough power manually to create ignition, but the electric is not.
turn the key , if it starts it works..
Google it, It works
Ask a Mechanic or person who works on cars
A direct line starter is a simple motor starter used to power electric machines. It works by coupling the motor to the power supply directly at full function.
starter relay replace starter relay I am not sure but you may have to replace the starter