The idle speed is factory pre-set, and no adjustment is available. If the idle is too high, or too low, you will be having other problems that will affect the idle. In cooler temperatures, it will take the engine longer to come out of fast idle, as the engine warms up to operating temp. If the idle is too high/stays at a higher than normal idle, then take the thing to get it repaired. Running a car in gear(automatic transmission) with a higher than normal idle, can damage the transmission.
from what i knowfrom what i know no the years are from 94-98 on a galant well that's what my book say's and i have a 97 Mitsubishi and i pretty much heard it all
Where is the transmission control module on a 1997 Mitsubishi galant
yes...you may need some special body contorsion.
hey that will be 134a all vehicle from 1993 uses 134a
The eagle 2000 gtx is the exact same car as the Mitsubishi Galant, and the similar Galant had production years from 1989-1993, from my sources anyways. Either track down a repair manual for the Galant or go to alldata.com and pay the $20 for the online repair manual version to the Galant.
You can remove your 1993 Mitsubishi alternator belt by loosening the tensioner pulley. Slide the tensioner pulley to the right. The alternator belt will become loose and can be removed. Reverse the process to put the new alternator belt on.
ok, to start off, not trying to sound like a smartass or anything, but their is no dipstick on a manual transmission. their is a fill/check plug on the side of the transmission. you have to take it out and check the level that way on a manual transmission.
The 1993 Mitsubishi Eclipse with the 1.8 liter engine is not on the list of cars with interference engines. The 1989-1998 2.0 Galant Eclipse cars were built with interference engines.
cylender head bolt torque for 1993 Mitsubishi expo
galants 1993 to 1998 for a full list of all cars go to link below http://www.aras360.com/Pdf/resources/Sister-Clones-List.pdf
OK, what is your question?
All the torque settings for your entire car should be listed in a Chiltons manual. Get one at your local auto parts store for about 15-20 buck. darksidesteve
3000gt Mitsubishi 1992 is jumping out of reverse
it should be located in the fuse box under the hood also check in your vehicle manual in the index area it should be located in the fuse box under the hood also check in your vehicle manual in the index area
Ooh, this is a fun one. The water pump is driven by the timing belt, so you have to remove and replace that to change out the water pump. ~Pengauin
The 3.0L V6 is a Mitsubishi engine, all others are Chrysler.
The best place to start looking would be the Chilton's repair manual. It contains a complete wiring diagram for the entire car. It has all the stuff Mitsubishi doesn't want you to know about. Your closest autoparts store should have them in stock for about $20.00. It's good to have one anyway.
under the stering wheel
There are various websites where you can find a wiring diagram for a Mitsubishi Triton 1993. You can also find the diagram in the vehicle's owner's manual.
If it is a manual transmission, then it is on the front of the transmission. It is one of the two electical connectors on the transmission. The other is the vehicle speed sensor on the backside of the transmission.
On the oil pan
The 1993 1.8L engine has 92 horsepower.