The electrons from the battery go through the wiring to the bulb. Inside the bulb, they heat a tungsten wire so hot that it glows, giving off light.
No set answer to that, it depends on the power consumption of what they're connected to.
No set answer to that, it depends on the power consumption of what they're connected to.
Of course flashlight use batteries,no batteries means no power. I have a Imalent flashlight with remote control,very fashion,lol
The input system of a flashlight is the batteries
Because they are connected in series. Lets say you have a flashlight that holds 2 D cell batteries. Each battery puts out 1.5 volts. Connect them in series and together they put out 3 volts. The flashlight is designed to run on 3 volts. A electronic device that uses 4 AA batteries is using 6 volts even though each battery is only putting out 1.5 volts. Connected in series you add to the voltage with the addition of each new battery.
Well what you would do is you would put the first brand of batteries in the flashlight and you would time how long the batteries lasted and right it down . Then put the second brand of batteries in the flashlight and turn on the flashlight and time the flashlight and see how long the batteries lated and wright it down and you have your answer .
The first flashlight is made of flowerpot, lamp and batteries.
The answer is governed by the size of the flashlight. Count the amount of batteries that go into the flashlight and then multiply by 1.5 and this will give you the voltage of the flashlight. For NiCd and NiMH rechargeable batteries multiply by 1.3 volts.
Car batteries will make a larger explosion than flashlight batteries would.
Duracell!!!
unscrew the top
yes