The color of light is related to its frequency or wavelength.
Transmittance is the ratio of light energy that is falling on a body. Absorbance is how much light energy is actually going into the body.
In one narrow sense, they are exactly synonymous. If you mean "communication by means of transmitted signals," then either word is fine; they are interchangeable. But that's all. Each word has shades of meaning that do not overlap. Transmittance is a word used in Physics that means "The ratio of the radiant energy transmitted to the total radiant energy incident on a given body." You can't use the word transmission in that sense. Further, the word transmission has another connotation: the act of sending a message; causing a message to be transmitted." You should not substitute transmittance in that sense. And finally, the gearbox in your car is a transmission, not a transmittance.
UV can effect when O2 in crease in the procces and accidity also.
Its color.
how do you convert percent transmittance to mg/l
There is none.
Sometimes you do in fact. In IR spectroscopy, the transmittance is commonly plotted instead of absorbance.However, in most types of spectroscopy, the absorbance is plotted instead. This is due to Beer's Law, which states that the absorbance is directly proportional to the concentration of the sample, the absorptivity of the sample, and the path length (in contrast, the transmittance is exponentially related to those things). Because of the much simpler direct proportionality, absorbance is preferred in many cases.
The lower transmittance of film would indicate a higher Optical Density (OD), or absorption, because as concentration increases, % transmittance will decrease. This is because of Beer's Law (A = 2.00 -[log (%T)]). As you can see from the equation, transmittance is directly proportional to the outcome of absorption. High %T = Lower Absorption.Low %T = Higher Absorption.
A=logIo/I
The percent transmittance grew to steadily higher numbers as the experiment progressed because the light reaction was able to occur. However, the dark cuvettes had stable levels of transmittance because light is necessary to excite electrons, which, in turn, reduces the DPIP.
A=-logT A=-log 0.34 A= -0.4685
beige is related to the color white.
Absorbance = -log (percent transmittance/100)
The color of light is related to its frequency or wavelength.
27? lol 24!
You get no light transmittance or absorbance.