1995 GMC Jimmy Remote Start System Wiring
Vehicle Battery Positive Wire (+): Red
Vehicle Battery Positive Wire Location: Ignition Switch Harness
Vehicle Ignition Wire (+): Pink
Vehicle Ignition Wire Location: Ignition Switch Harness
Vehicle Second Ignition Wire (+): White
Vehicle Second Ignition Wire Location: Ignition Switch Harness
Vehicle Accessory Wire (+): Orange
Vehicle Accessory Wire Location: Ignition Switch Harness
Vehicle Second Accessory Wire (+): N/A
Vehicle Second Accessory Wire Location: N/A
Automobile Engine Starter Wire (+): Yellow
Automobile Engine Starter Wire Location: Ignition Switch Harness
Automobile Second Engine Starter Wire (-): N/A
Automobile Second Engine Starter Wire Location: N/A
Factory Anti-Theft System: GM Passlock II Vehicle Immobilizer
Factory Anti-Theft System Type: The Key Sends a RF Signal to the BCM Module
Car Key Sense Wire (-): Light Green
Car Key Sense Wire Location: Ignition Switch Harness
Car Neutral Safety Wire (+): N/A
Car Neutral Safety Wire Location: N/A
Car Tachometer Wire (-): White
Car Tachometer Wire Location: Ignition Switch Harness
Car Speed Sense Wire: Green/White
Car Speed Sense Wire Location: At Pin #3 in 24 Pin Black Connector at VCM Module
Car Parking Lights Wire (+): Light Blue
Car Parking Lights Wire Location: In Blue Plug at BCM Module
Car Brake Lights Wire (+): White
Car Brake Lights Wire Location: At Switch Above Brake Pedal
Car Reverse Lights Wire (+): Gray
Car Reverse Lights Wire Location: In Harness Going to Transmission
Car Horn Wire (-): Black
Car Horn Wire Location: In Harness at Steering Column
A Bulldog Security Remote Starter is a keyless entry system designed for use in vehicles. It allows you to unlock the car and even start the engine from a distance of up to 800m.
you have to take it to a dealership you have to take it to a dealership Answer !!!! No you do not have to take it to the dealer.. Call a Locksmith Dealers hose you.
$99 is the remote starter by itself, there is a drop down installation option that includes the security interface required by newer cars and also the unlock option if your car has power door locks.
If you cannot lock the doors , but you can unlock them with the remote or keypad - I believe there is a door lock relay in the jack storage compartment (among 5 relays) I believe it is one of the two large relays and is located on the left at the bottom. If you can't lock or unlock the doors with the keypad or remote - some 1995 to 1997 Ford Explorers had a problem with the RAP (remote anti-theft personality module) being damaged by static electricity causing the keypad and remotes not to work. The repair involved installing a "redundant ground" on the passenger seat(s) Check with a Ford dealer
# Disconnect the remote battery negative cable from the terminal on shock tower # Remove air cleaner resonator. # Remove the battery positive cable nut from starter. Remove battery positive cable and generator output wire from starter # Disconnect push on solenoid connector. Unlock the red locking tab and compress lock to release the connector. # Remove two bolts attaching starter to transmission housing and remove starter from vehicle. # Reverse steps to install.
One reason that your remote key will not unlock your Mazda 6 is that a fuse is blown. You may need to replace the batteries in the remote or reprogram the remote. A bad body control module is another reason the remote will not unlock the doors.
If you are able to unlock the doors but not lock them I would suspect the " door lock " relay located in the jack storage compartment . There are relays for door unlock / door lock / interior lamps / driver door unlock / and trailer park lamps in the relay box. The door lock relay is one of the larger relays , located in the bottom left position ( looking at the picture ) good luck !
Unlock the car with the remote or with the key in the door.Unlock the car with the remote or with the key in the door.
Unlock the car with the remote or the key in the door.Unlock the car with the remote or the key in the door.
have you checked to batteries in the remote?
how to unlock a Hyundai tv my unlock button on my remote isnt working
In order to unlock the LG flat TV, you will need to unlock it by obtaining the remote control unlock code in the remote's pamphlet. Enter that number into the remote and the television will unlock.