i think it would depend on whether it is split from one cable or not. More importantly, i am not sure why you would want to do that? What's the advantage? NO. Your cable modem is like a digital box, it's an addressable device that needs to be authorized to let you go online. you can have 2 cable modems in a single room if you want but you have to have two separate accounts. Provisioning of the cable modem is done through an application that manages billing, addressability, and authorization of CPE (customer premises equipment). so once the codes are right in the account, an order goes to the cable headend to authorize that device, wether it's a cable box or a modem or a phone box... hope this will help. (BTW i am a cable technician)
yes
Yes you can. Just connect it to the cable box, and set it up correctly.
you need vga to rca cable
If it is WIFI then you will need to connect it with the cable first to set up the passwords and access keys for wireless. Then, if you have a wireless card on your computer, you won't need the cable after setting it up.
its the same process as u set up a SATA drive... the first thing to do is to remove the jumper from the drive and then use the IDE cable to connect it with it. then go to the drive options and set it to serve as the main.
You have couple of choices. First is to connect your router to existing network using a cable. And then configure secured wireless network using your router settings. Second is to connect using Bridge configuration. You might run in problems with Bridge due to compatibility issues. You even will have change firmware to DD-WRT (if your router is compatible). Once you set Bridge then you go to router settings and configure secured wireless. And here you might run in problems too because you are basically extending non-secured network in a secured. A lot of routers will not allow you to do that.
Yes, just connect the audio and video cables and hit.
It allows you to connect component cables into a HDMI connector/cable on the tv set.
To use a computer on a TV you need a coaxial cable or hdvga cable. You can look on your TV and find what cord it has and use it to connect to your computer.
You purchase a router and connect it to the cable modem and then connect everything to the router. Otherwise you have to unplug whatever is connected to the cable modem (for example a PC) and plug in the PS3 . Whatever you have unplugged is no longer connected to the internet until you unplug the PS3 and plug it back into the modem. Once the PS3 is connected to the cable you need to go to network settings on the PS3 and set up the network connection.
Just connect the cable but make sure you set the connection type to something other than "charge only" on the phone, depending on what you want to use it for.
you dont. go get a remote