the harmonic balancer on the 350 is about 10 inches in diameter compared to a 305 it has about 8 inch diameter on the harmonic balancer
1986 Chevrolet c10
Having the belts properly lined, helps the car run properly. The diagrams for installing a belt for this car are found in the owners manual.
Should be an 305ci. V8, some also were equipped with a 350ci. engine.
v6 229ci produced 110hp v8 305ci produced 155hp v8 350ci dropped from 190hp from 1980 to 165hp in 1981
They all should read at least 140 LBS. There should be no more then 15 LBS difference between any cylinder. If there is then you will have a rough idle. And the engine will not run right.
Cubic Inch
j
Internal -- Inside the alternator.
roughly about 400 horse power
no the bore is different
It's based on displacement, yours is 305 cubic inch which is a small block, big blocks are usually up above 400 or so You're right, a 305 is a smallblock, but the difference between bigblocks (bb) and smallblocks (sb) is NOT entirely based on displacement. Although it would seem that increasing displacement at a certain point draws the line between a sb and a bb, this is not the case; i.e a gm 396 cui is a bb whereas the 400 cui is a sb. The reason for this is that the difference is based on the (physical) size of the block itself,-as the manufacturer in this case traditionally operates with two different sized v8 blocks, one was named smallblock, the other bigblock. So, in the end the difference here is something one has to look up in a manual and then remember for future reference.
Answerits officialy rated at 185hp, but if your going to get a third generation camaro i would settle for the 1991 Iroc whci had about 225hpThere are actually 2 versions, the lower is 150 hp 305ci. The second is a 190 hp 305ci called the HO (high output).