Digital quantized information and analog is just information. Like the letter "i" on your screen is digital and made up of a few pixels= quantized. The letter "i" drawn on a piece of paper is not quantized = analog.
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
Digital technology uses digital data -- sets of discrete values, typically the numbers 1 and 0 -- to represent information. This is in contrast to analog technology that uses continuous values to represent data. All modern computer and electronic equipment are digital because they use and manipulate information using the digits 1 and 0. Digital technology has largely replaced slower analog systems due to its numerous security, speed and error control advantage
Computers DO use analogue methods to transfer information.Modems, for example (short for "Modulator/DEModulator") use either frequency shift or phase shift to transmit information.Your monitor, even if it is a digital monitor, is using light to transmit information to your eyes, which is an analogue medium.Even your wireless connection uses frequencies (analogue) representing ones and zeros to your computer; where the frequencies are converted back to ones and zeros by the wireless card.
The devices are known very simply as analog to digital converters and digital to analog converters. They are frequently shorted to A-D and D-A converters. A complete analog to digital converter will not only convert the analog signal into a set of numbers, it will also format the digital data ready to deliver to the next step in the signal chain. In television, this means generating a fairly complex stream of data that will carry not only the picture but audio and other data as well. Digital to analog converters reverse the process and use the incoming data to generate an analog signal. In television, well know examples are the digital set top boxes. They receive digital data from an antenna and convert the numbers into analog audio and video signals.
by using some of the converters we can swap the analog dash into digital
by analog to digital,digital to analog signal
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
A: An ADC will convert the analog to a digital value compared to a known analogue reference. Each digital output will represent a value in BCD form as bits to analog input
A: An ADC will convert the analog to a digital value compared to a known analogue reference. Each digital output will represent a value in BCD form as bits to analog input
A: An ADC will convert the analog to a digital value compared to a known analogue reference. Each digital output will represent a value in BCD form as bits to analog input
There are several devices called digital to analog converters for this purpose. 1s and 0s of the digital signal are used to represent the digital signal in analog form.
It depends on your monitor. The big old CRT monitors are analog. The computer sends digital information to the monitor but it then gets turned into analog so the monitor can display that information. The LCD monitors are digital. The computer sends digital information to the monitor which it can display because it is digital.
Analog signals are continuous while digital signals are discrete
Information about a digital to analog converter can be found on the site Hardware Secrets which divulges that real world signals such as light and sound can be converted into digital signals by a circuit called ADC (Analog-to-digital converter) so that the information, once converted, can be processed and stored digitally.
Modulation
With analog and digital signals.
An DAC convert digital signal to analog signal i.e Digital to Analog Converter. An ADC convert analog signal to digital signal i.e Analog to Digital Converter.