You don't need to get to the negative side of the battery. If it's hidden or difficult to reach, you can just connect the negative side of the charger to any solid metal structure on the body or engine.
Remove the old battery, disconnect the negative cable first and install the new battery connect the negative cable last.
Remove transmission oil pan to access fluid and filter
To change the battery in the 2003 Cadillac Seville, you will need to first access the battery that is located under the rear passenger seat. Then remove the battery cables and remove the battery.
As the battery charges, the negative plate changes to metallic lead, and the positive plate change to lead dioxide.
1. Remove negative battery cable 2. remove positive battery cable 3. remove battery 4. install new battery 5.attach positive cable 6.attach negative cable
Change the positive post? You can change the battery with a new one but you cannot just change the post. If you mean reverse the positions of the positive and negative posts then buy a longer battery cable.
Disconnect the negative battery cable and then remove the positive cableRemove the battery heat shieldRemove the battery hold-down clamp boltLift out battery
the battery is in the fender well. You nee to take tire off and remove part of the fender well to access the battery.
YES always disconnect the negative cable from the battery first then just be careful to hook up the negative cable to the battery as the last step
NO,do you need to down the fuel tank to change the fuel pump.
Always disconnect the negative battery cable first even if you are changing the positive cable and reconnect the negative cable last. This is to prevent accidental shorts to ground.
Remove brackets that hold existing battery in place. Unscrew negative cable, then positive cable. Pull old battery out. Place new battery in. Fasten negative battery cable, then positive one. Place bracket back on and tighten nuts.