Want this question answered?
You connect the cables BEFORE you plug in or turn on the charger. Positive (red) to battery positive first, then negative (black) to battery ground. Then you turn on your charger and set the timer.
Connect the positive + red charger cable to the positive + red battery post. Then connect the negative - black charger cable to the engine somewhere. Most engines have something metal sticking up that you can connect to. Do not connect the negative charge cable to the negative battery post, always connect it to the engine.
Connect the positive (+) Red cable from the charger to the positive (+) post of the battery. Now connect the negative (-) Black cable to a metal part of the engine. Do not connect to negative battery post. Plug the charger in. Unplug the charger before removing the cables. Disconnect the negative cable first.
Yes you can. Connect the chargers positive lead to the positive of one battery, then the negative side of that battery to the positive side of the other battery, then connect the negative lead of the charger to the negative of the second battery. Double check all your connections and turn on the charger.
You connect the batteries in series Red charger lead to one red battery terminal, then the black battery terminal of that battery to the red battery terminal of the second battery. Then black battery terminal of the second battery to the black lead of the charger.
Yes, just find connect the charger positive cable to the positive + side post terminal on the battery. Then connect the negative charger cable to any metal place on the engine. Plug the charger in and it will recharge the battery.
First connect the battery charger positive connection to the Positive post on the battery and the negative connection to any place on the engine away from the battery and not on the negative battery post. Connecting the battery charger any other way is unsafe.
Yes ( when you are using a battery charger ) Just make sure the charger is not on when you connect the cables. Another safer way is to connect the negative cable to a part of the engine and not even connect it to the battery post.
Connect the positive clip of the charger onto the positive post of the dead battery. If the battery is located inside of a vehicle, connect the positive charger clip to a grounded surface--like an engine block--on the vehicle.
Remove the battery from under the driver's seat. Connect it to a small battery charger suitable for motorbikes. Connect the leads to the terminals. Charge until the meter on the charger shows that the battery is fully charged.
take the back seat out othe car and hook up the battery charger to the battery red to pos and black to neg
Connect them together in Series. Connect the negative post of one battery to the positive post of the other battery. Then connect the negative charger cable to one negative battery post and the positive to the positive post of the other battery.