A trim kit is just the outside parts that you see. This will make you faucet look better, but it wont affect the function of your old valve. If your shower valve doesn't work right, replace it.
1- plugged shower head 2- defective diverter
According to the Architectural Graphic Standards The height is 42" from the shower floor. and the head should be between 65" and 78", I usually set this height at 74"
This depends, as some faucet handles have a screw inside which is taken out using a flat or star headed screwdriver, while other types have a grub screw which is taken out using an Allan key.
It doesn't but you better run sir/madam their may be a ghost in your bathroom.
Take the end cap off, unscrew the screw in the handle, take off handle, put exact same new handle on, screw it down, put cap back on.
form_title= Shower Faucet form_header= Install the shower faucet you want in your bathroom! Do you have a working faucet in your bathroom?*= () Yes () No () Not Sure What type of faucet do you want installed?*= _ [50] Do you want the shower faucet to include a massager?*= () Yes () No () Not Sure
Yes
yes
YES
Proably the faucet has a worn out washer, replacing the washer should fix the problem.
All types of showers can function with a bronze shower faucet. Just make sure that when installing the faucet, that you caulk all joints properly to prevent leakage.
No conversion, it would need to be replaced with a single handle faucet.
Usually 48" off bottom of shower floor to center of shower faucet.
usually to save water
The shower gurgles because the water is going down the pipes.
To remove old shower pipes to install a new shower faucet, turn the main water off first. Then either cut the pipes at the joints or unscrew the washers holding the pipes together.
Ants in your shower faucet could come from several different places. You may have cracks in your walls or floor that the ants are coming from, or they may have originated in another part of the house and found their way to the shower.