Take it to a shop or take the batter out and let it reset itself then put the batter back in
I have an 06 Colorado and there was a recall on them for that. Might be something to check into.
The check engine light on a Chevrolet Colorado can be rest by connecting an OBD II code reader to the vehicle's computer . Each of the codes can then be reset which will turn the associated light off.
Pull the positive battery cable off and wait about 10 minutes. This resets all codes in the PCM. But, if you haven't fixed the reason the light came on, the light will only come back on again.
check for a code . usually means you need a new thermostat
I have a 04 Colorado its easy..... put the key in run and push the GAS IN 3 TIMES and its fixed!!
It is important to know what the lights on the dashboard mean. To turn off the check engine light a person needs to repair the issues in the engine.
How do I take off the handle to put a new one on a chevy colorado 2005
You will need a engine scanner to do that. There is a reason that it came on, and if you did not repair the problem then it will just come back on.
usually just unhook your batt for 30min it should clear it out
usually just unhook your batt for 30min it should clear it out
Have vehicle scanned to determine the problem and have codes cleared
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.