all you need is probly a new fuse in the fuse box.....check it and report back.
well that depends if you ordered cruise control on the dash as a spectrometer setting , if so then the gauge might need re wiring due to there is will be a short circuit from where the cruise was and where it is now. Hope that helped, goodluck CiVicGuy3
If the cruise control on your 1987 300ZX does not work, you might have an issue with the cruise control fuse or wiring. You could also have a problem with the switch that turns the cruise control on and off.
cruise control does not work on 98 astro van
Cruise will NOT work if the speedometer has a problem
cruise would work but if i push to accelerate it would disengage an truck only after restarting would it work again. Now it does'nt work at all. Any suggestions?
the crusie control band is probly broken
cruise control does not work when headlights are on
Have you tried pressing the cruise control button on the dash?
Check the hoses connecting to the cruise control (under the hood) are properly connected and in (good condition). The hose that connects the cruise control to the intake manifold is right where your elbow would be when removing the oil filter from above...so if you change your own oil, you may have accidentally bumped the hose off like I did recently.
My 08 GMC Sierra has Active Fuel Management, and it does work while using cruise control.
You probably need to install a new cruise control component.
check the module connected to the throttle body that the wires and cable are connected to it correctly,this controls the cruise control. also check the brake lights so they are working proporly