On the single lever handle just unscrew it.
Under the index button there shold be a screw , loosen the screw and take off the handle
Get a faucet handle puller AFTER you remove the screw then follow the directions
Turn the water off to the faucet. Remove the handle. The top of the faucet should unscrew to get to the ball valve. Replace the valve and gaskets then reassemble the faucet.
The stem is the rod that sticks out of the faucet that the handle fastens to.
Remove the handle, turn off the water with a wrench and reatache the handle in the correct position. Good Luck
Gather Tools and Materials. ... Turn Off the Water Supply and Open the Faucet. ... Remove the Handle Cap, Handle and Faceplate. ... Remove the Locking Clip. ... Remove and Replace the Cartridge. ... Replace Other Parts and Test. ... Remove the Metal Stem in a Shower Faucet with Two Handles. ... Replace the Metal Stem if Needed.
we have had this faucet for a long time and I have done several repairs on it, because it has a lifetime warranty Moen sends us the parts and it is simple to repair. To remove the handle, carefully remove a small plug on the front of the handle, some have the Moen name on them and the one that we currently have is the same color as the faucet. You can remove them easily with a small knife or screwdriver, just make sure not to scratch the finish on the faucet. Under that plug you will find an screw that uses an Allen wrench (3/32), loosen it and the handle will come right off by lifting up on it. To get to the rest of the faucet just lift the dome and the cartridge is ready to remove with a wrench. Don't remove the cartridge without turning off your water source!
1/8 wrench for that one.
I believe that is 5/32.
The spring holding the door button in place has fallen out. Remove the door handle and replace.
The correct hex/allen wrench to remove a Moen faucet handle (for the Renzo model faucet) is 7/64".
The cap does NOT come off. It is all part of the handle. To take the whole handle off, there is a set screw at the back that can be undone with an allen key. The older discontinued models, the cap can be pried off with a small screwdriver.