The ignition timing is non-adjustable. It is strickly electronic, and you cannot change it. The valve timing is controlled by the timing belt. If it has jumped time, you have to remove the timing cover to access the belt, replace it, and set it to the correct specifications.
how do you set the timing belt on a 1997 ford contour 2.0 4cy
Ignition timing is automatically set. sorry.
The 2.5 litre V6 engine in a 1995 Ford Contour doesn't have a timing belt , it uses ( 2 ) timing CHAINS
timing is off check it
computer controlled.
You cant. It is all controlled by the ecu.
u cant most newer vehicles timing is controled by the cars computer
you set timing by the marks on the cam shaft and the crank shaft. they should point at together to make it run right.
To set the ignition timing on a Ford Probe GT 95 with an MX engine, remove the two 12 mm head bolts holding the distributor in place. Then rotate the distributor to set the ignition timing.
I don't have a Contour, but if it has a distributor, then you use a timing light and simply twist the distributor cap to change the timing. If it has coil packs, then it's all done electronically, and you can't adjust it. If your timing is still off, you have a sensor somewhere feeding the ECU bad info. ====================================================== All of the Contour engines' ignition timing is controlled by the computer, and is not adjustable. If there were any sort of problem in this area, the computer would turn on the "Check Engine" light and store an error code.
can u give me a diagram on the timing marks for my 95 hyundi elantra
The distributor is set to 0 deg with a scan tool. It can not be done with a timing light.