there are no marks, the cam and pump sprockets have a hole in one of the arms which you line up with a threaded hole and bolt them into position.
As for the crank, this has to be locked in TDC position which I think requires another bolt passing through the crank case somewhere which lockes it into tdc.
Personally I put my own marks on before removing the old belt, then line them up for the new belt. This allows you to turn the engine a few revolutions by hand and check all the marks still line up before putting it all back together.
looking for the correct timing marks
The timing marks on your Isuzu 4hf1 engine can be set by looking at the timing marks on the timing belt pulley. The timing belt marks are facing towards the front of the automobile.
The timing marks on your Isuzu 4hf1 engine can be set by looking at the timing marks on the timing belt pulley. The timing belt marks are facing towards the front of the automobile.
looking for the timing marks corsa c 1.2 16v
do you have to change a timing belt on a 93 318 is BMW
were are the timing marks at
the timing marks are on the crankshaft pulley and camshaft pulley.make sure they line up with the marks behind them on the relevant part of engine you are looking at.
On the Crank Hermonic Balancer Depending on the year you may not have marks, my 99 has a 3.8 with coil packs, with no distributer you can't change timing unless you do it thru the computer in the car, so there is no need for timing marks.
Details on how to change a timing belt on a 97 XL ford pickup. Details on how to know which marks are the correct marks to follow while changing the belt.
WHATS THE TIMING MARKS ON 93 MAZDA 929
i dont know,it doesnt have marks on it
It should bethe same as a 1997 and there will be no way to adjust the timing as it is an electronic ignition. If you are changing the timing belt and looking for the top dead center marks (TDC) That is a different matter...