how i do them i want it done as easy and as painless as possible so i remove the upper portion of the shroud three bolts on top four on bottom. the put a ratchet on the tensioner set your ratchet to trun left apply tension remove serpentine belt put a large pipe wrench on that large nut on the fan clutch remove the for little nuts on the pump pull the fan clutch out un bolt the water pump and then scrap off the old gasket material get your rtv silicone out i use permmatex water pump rtv apply it to new gasket and form it to the new pump and then reverse the the process to put it back together
no
Do u need to take the pulls off to change the water pump on a 2001 concordeLXI 3.2 motor
It's a good practice to change the water pump when you are changing the timing belt.
LOOKING TO FIGURE OUT HOW TO CHANGE WATER PUMP 2001 PONTIAC GRAND AM 2.4 LITTER
behind the timing cover you should change the timing belt when you change water pump.
how do i change a water pump in a 1991 dodge shadow with a 2.2 liter does it require an internal water pump
Remove the water return hose from your 2001 Suzuki water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install your new water pump.
GM does not have a 5.4 liter it's most likely the 5.3 liter.
You will need to remove the water from your 2001 Buick Aurora cooling system. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
see link below
The water pump should be driven by the timing belt, yes. If you change the water pump, you might wanna change the timing belt and tensioner while you're in there.
The pulley is pressed fit onto the pump. It will not come off the pump. You have to replace the pump to replace it.