The dealer wants approx $70 for the switch, if you have cruse control, less if you don't. Autozone wants approx $65, so get the OEM from the dealer. The switch is up under the dash. If you are small and have small hands it is a 15 min job. If you are over 6 ft, you end up removing the drivers seat so that you can get 2 hands up under the dash. You need two hands to get the plug out of the back of the switch, after that, it is a one hand job.
how to change manual ignition switch on a 93 Honda accord
how to change dimmer switch on 1997 Honda accord
The fan does not have a switch - the thermostat switch runs the fan.
The brake pedal switch is bad. How do I replace it?
repplace vale
A 1999 Honda Civic Ignition switch is located under the steering column. Remove the steering column. The switch is seen connecting to the dash harness and lock cylinder. Unplug the switch from both places and replace with a new unit.
There is no such switch on a Honda.
The Honda Civic 1.6 liter engine ignition switch is held in with a retaining ring. Unscrew the retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
In order to replace the ignition switch in a 1997 Honda CR-V, you must first unplug the ignition switch power source. Unscrew the cover panel, remove the bolts holding the switch, and pull the switch out of the column. Replace the old ignition switch with the new ignition switch, return the bolts and screws, and reconnect the power source.
Honda vehicles are not equipped with a fuel cutoff inertia switch.
Honda does not equip their vehicles with an inertia switch.
My 1998 Honda Accord LX was getting stuck intermittently in Park. I found that the switch that turns on the brake light when you press the bake pedal was going out. This switch is $32.00 at any Honda dealer and most importantly YOU can change it yourself. Ironically, that same switch activates the gear shifter pin that lets you take it in and out of gear.