answersLogoWhite

0


Best Answer

The entire front grill must be removed, by removing (8) 7mm screws, parking light assemby must be removed to reach 7mm screw behind it. There are( 4) T15 maybe T10 screws holding each assembly. Two of the 7mm screws holding grill are in center one just above bumper and other towards the top, you'll need an extension in order to reach them through grill. Unplug parking lights and lift grill up and out to remove. You will now be able to see the (4) 10mm screws holding headlight assembly in place.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do I Remove headlight assembly 1992 gmc sierra?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove the headlight assembly on a 1992 tempo?

if you lift the engine hood there should be 4 nuts by where your headlight bulb fits into the housing.they should be size 12mm nuts.just remove those 4 nuts and the headlight bulb retainer(you remove that by twisting counter clockwise) and your headlight assembly should pull right off


How do you change a headlight in a 1992 gm sierra?

The easiest way is to pull the long bolts out of the headlight at the top of the grill, i think a 5.5mm socket fits it, the whole assembly pulls out when they are removed, and it is easily installed.


Is there a way to remove the headlight assembly from a 1992 Ford Thunderbird without taking it to a garage?

Yes there is! You need to get a pair of pliers (called "snapring pliers")to remove the retainers (the little silver "do-dads" holding the headlight assembly in place... on the back of the grille opening panel). There's 2 of them on each assembly. You get those off and the headlight assembly practically FALLS out!!


How do you remove the outer lens cover on the headlight of a 1992 Ford pickup?

you can't. You have to replace the whole headlight assembly, it doesn't come apart. check the junk yards or eBay it's cheaper.


How do you replace the headlight bulb located on a 1992 Mazda 929?

Open the hood and look at the headlight assembly. There are three 10mm bolts holding it it. Remove these and unplug its wiring harness. Now you can remove the assembly from the car . On the back you will see three circular covers for the lamps. Unscrew these & replace lamps & reassemble! Hope this helps!


How do you remove the headlight assembly of a 1992 Buick Park Avenue?

Lift the hood and loosen the round screw heads directly above lights - 2 on each. lift assembly off of the rack and unplug light


How do you replace the headlight assembly on a 1992 Toyota Privia Both left and right assembly units?

Here is a hint, ask a dealer!


How do you remove the turn signal assembly on a 1992 Pontiac Bonneville?

how do you remove the turn signal assembly on a 1989 Pontiac Bonneville


How do you replace headlight assembly on 1992 BMW 325is?

You can go to Wal mart and ask the sales associate


How do you replace the horn on a 1992 Mazda 323?

you need to remove the plastic grill, followed by the passenger side front headlight assembly. the horn is a small dual disk looking device, remove the single bolt holding it to the vehicle, unplug, and remove. if that doesnt fix it, you may have a wiring problem


How do you remove spark plugs for 1992 olds cutlass sierra?

Use a sparkplug socket and turn counter clockwise


What size Allen wrench to remove front caliper on 1992 GMC Sierra?

3/8 inch allen.