From the owner's manual
Programming spare keys
You can program your own coded keys to your vehicle. Please read and
understand the entire procedure before you begin.
Tips:
• A maximum of eight keys can be coded to your vehicle.
• Only use Securilock keys.
• You must have two previously programmed coded keys (keys that
already operate your vehicle's engine) and the new unprogrammed
key(s) readily accessible.
• If no previously programmed coded keys are available, you must take
your vehicle to your dealer to have the spare key(s) programmed.
1. Insert a previously programmed
coded key into the ignition.
2. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
3. Turn the ignition to the 1 (LOCK) position and remove the coded key
from the ignition.
4. Within ten seconds, insert the second previously coded key into the
ignition.
5. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second, but no
more than 10 seconds.
6. Turn the ignition to the 1 (LOCK) position and remove the second
previously programmed coded key from the ignition.
7. Within twenty seconds of removing the previously programmed coded
key, insert the new unprogrammed key into the ignition.
8. Turn the ignition from the 1 (LOCK) position to the 3 (ON) position.
Keep the ignition in the 3 (ON) position for at least one second but not
more than 10 seconds.
How do I recover a lost Keyless Entry Code on a 2008 Ford Escape Limited? Above is NOT an answer ! Hello ?!
9 MM
Each vehicle with a key pad has it's own factory code
The unlock button on the key fob usually works. If it doesnt you may have to use the keys.
One way to unlock a Ford Escape without a key is with the car remote. Another way to unlock a Ford Escape without a key is by using a coat hanger. You may have to call a locksmith to open your car door for you.
The key sensing wire in a 2004 Ford Escape is black and pink. It is always a good idea to verify the color of the wire before doing any work.
you will need an Allen key 9mm to remove the caliper.however very difficult to find one unless by snapon tools
Do you mean the key in ignition chime?
turn it off with the remote or you must use the key in the door.
PrecisionTune does it here.
stick your key in the door and open it then it will restart
Wedge open drivers door, insert rod push unlock button