Take it to the shop. You need air tools to remove a 181 ft-lb axel nut. As well as a heavy-duty torque wrench to tighten it back to 181 ft-lbs.
"http://wiki.answers.com/Q/How_do_you_change_front_rotors_on_1994_mitsubishi_3000gt"
Pull the tires off and take the brake calipers off and the rotors will pull off.
wear gloves, bearings all come out. then you have to remove the sensor off the back of it. along with 6 17mm bolts. How do you change the rotors in the front on a 1998 Isuzu Trooper
Remove the tire and wheel from your 1994 Chevy. Remove the brake assembly. Tap on the rotors with a hammer or mallet. The rotors will slide off. Reverse the process to install the new rotors.
Most Honda's require that you pull both axle shafts IN, which means some major disassembly of the front suspension. You'll need a front end alignment after you're done.
With the wheel off, remove the calipers, then the rotors just come off.
Lug wrench, metric socket set, "C" clamp
"http://wiki.answers.com/Q/How_do_you_remove_Front_Rotors_on_a_1994_ford_ranger"
Could be the tires, or your front brake rotors
The minimum brake rotor thickness for a 1994 Ford Thunderbird car is .974 inches for the front rotors and .657 inches for the rear rotors.
It is necessary to state whether it is a 4X4 or a 4X2
Like this...