The valves are in the front trunk on the passenger side.
Were exactly do you put the freon hose for a 1999 toyata corolla
put the turn signal on, get out of the car and see if it works :-)
When you are going to add Freon to a Toyota Camry, you need to know which type to add. You will need to put the Freon recharging coupler to the recharging kit, and get the engine to operating temperature. When the engine is at operating temperature put the air conditioning on the lowest setting and recharge the Freon with the windows of the car rolled down.
you will have to look at the electrical connections at the back of the alternator to see if it will plug into your loom.Also you might need to look at the amps put out by both units to see if they are the same autos usually put out more there should be a label with this info hope this helps. Matt the alternator wont fit a Toyota runner it has to put more power then a corolla trust i know about Toyota
Can you put a 3.0 engine in an 86 mr2
Put a flat head screwdriver behind the indicator cluster and prize it out. Then just twist out the bulb.
Was built for R12, should be converted to R134a
Replacing fluids in a car can be tricky the first time around. The freon for a 1992 Honda Civic is put into the suction hose or pipe assembly under the hood.Ê
Buy a kit at Wal-Mart or auto parts store comes with instructions
The 2.2L early 90s enging was DOHC, not SOHC and no, it would not be easy to put that engine and transmission into a MkI MR2.
There were some R134a units in 1992, but they were not the norm. Most likely, you have an R12 unit, which requires retrofitting in order to be compatible with R134a.
If an electric window on a Toyota MR2 goes down, but will not go back up, it has probably slipped off the track. There is a cable mechanism that operates the window. The door panel will have to be removed to repair the cable, or put in a new track.