You have to remove caliper and rotor, punch out old lug and press in a new one.
Remove caliper and rotor, punch out old lug and press in the new one.
Yes , it's front wheel drive
The 1995 Ford Taurus front bumper is held in place by four retaining bolts and six retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
If they are of the "peel off" type: Remove wheel Loosen and remove 2 bolts that secure brake caliper Remove caliper and rotor should come right off If not "Peel off" type: Remove Wheel Loosen and remove 2 bolts that secure brake caliper Remove caliper Remove center dust cover from wheel Remove cotter pin Remove safety nut remove lock-nut wiggle rotor so bearings fall out and rotor should pull off
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
Should be "peel off" type Remove wheels Remove caliper mouting bolts Slide caliper off rotor Rotor should slide off hub
remove the brake caliper and rotor then you will see three star head bolts remove those and the hole spindle will come out[you may have to persuade it with a hammer]then bolt on new one and your done
The spindle is what the wheel bolts to and the brakes attach to.
You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.
You need to get the rotor off to replace studs with new ones.
u have to take the bolt off and slide that plate off in front of the rotor
Unbolt hub and press out wheel studs, clean hub face, replace rotor and press wheel studs back through, remount hub