Want this question answered?
cant open tailgate
The fuse panel in a Pontiac Montana is located in the passenger door. It is located on the same level as the glove box.
take the the black thing around it and then take it out dont worry it wont brake
remove screws. some may be hidden in the carpet and under tab covers.then the pannel will have one way or push ankers . just use a screwdrive to pry away.
just remove it
If all of the dashboard lights do not work at the same time on a Pontiac Montana, check the instrument panel relay. The relay is located on the firewall in the engine compartment.
The power sliding door fuse is located in the passenger side fuse panel to the right of the glove box. You need to open the passenger door, remove the access panel on the side of the dash and consult the layout map on the panel as to which fuse is associated.
Using a screwdriver, remove all the screws in the door panel and remove all the clips holding the panel to the frame. Gently pull the panel away from the frame, remove an wire connectors and pull the panel off the frame.
To take off the interior door panel on Pontiac Montana,remove bolt under door pull (10mm).Remove plastic "scoop" behind handle and lock with flat screwdriver blade.There is another bolt under it. Remove it.Pry up plastic housing for lock and window controls with flat blade screw driver.Remove wiring ( 3 units - mirror, lock and window controls) from housingPry around entire panel with a large screwdiver or prybar,pulling outnylon screws from holes in sheet metal.Lift panel out over handle and lock module, feeding wiring from controls through hole so that panel comes free.Then remove clear plastic from inside of panel to access window mechanism.Now if I just knew how to test window controller or motor to see what's not working.
I believe it is located under a panel on rear right of trunk.
You have to remove door panel
How to remove left inner door panel of a Pontiac Bonneville 1996