remove screws. some may be hidden in the carpet and under tab covers.then the pannel will have one way or push ankers . just use a screwdrive to pry away.
cant open tailgate
How to remove left inner door panel of a Pontiac Bonneville 1996
The fuse panel in a Pontiac Montana is located in the passenger door. It is located on the same level as the glove box.
take the the black thing around it and then take it out dont worry it wont brake
just remove it
Remove the liftgate inner trim panel.Remove the liftgate inner trim panel.
If all of the dashboard lights do not work at the same time on a Pontiac Montana, check the instrument panel relay. The relay is located on the firewall in the engine compartment.
remove the inner door panel, you can access the bolts from the inside of the door.
The power sliding door fuse is located in the passenger side fuse panel to the right of the glove box. You need to open the passenger door, remove the access panel on the side of the dash and consult the layout map on the panel as to which fuse is associated.
The inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel. Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle. Then remove the screws around the perimeter of the door that hold the outer panel. The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
Using a screwdriver, remove all the screws in the door panel and remove all the clips holding the panel to the frame. Gently pull the panel away from the frame, remove an wire connectors and pull the panel off the frame.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.