You can remove the door panel without breaking it by removing the two screws from the door handle and also the four screws from the speakers. Once done, gently pull the panel away from the door.
on my r reg 106 i drilled out the 2 rivits
i have a peugeot 106 zest 3 1.5 s reg probulem with rear door not closing propely
Yes
with a bar of soap
All the fuses are located to the side of the steering wheel. Remove flip down panel and search for the fuse using the fuse diagram located on the back of the flip down panel.
There is only one way to remove the door panel without breaking it! The way to do it is: Remove the TWO SCREWS from where the door handel is on the inside and also the FOUR SCREWS from the speakers. Once you have done this all you need to do is gently pull the panel away from the door... Be careful because if you break the clips, its a pig to get back on properly. The easiest way to do it is if you put a flat blade screw driver between the panel and the door and slowly pull it towards you until the clips pull out. The panel will now pull off the door.... but put it somewhere it wont get damaged because they are fragile. If you are wanting to get into something inside the door you will have to cut the plastic coating that is on the inside.... but only cut it on one sideand peel it across so you can stick it back on because it is a waterproofer. From Liam Spinks
Thanks for sharing. What a pelausre to read!
5225 inches That sounds about 5220 inches to big
mine does this in cold weather just climb in other door, i have to!
What's the question? Yes, a peugeot 106 has dashboard lights.
you haft to remove the bumper first to get to the bolts holding in the lights
No the Peugeot 106 is not considered vintage. This is true because the Peugeot 106 was made in the year 1991. To be a vintage car you have to be around for more the 20 years