Want this question answered?
for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan? for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
You have to remove the whole lense assembly. There are 3 nuts on the back, and 1 bolt on the top.
I detail used cars at local dealerships and I have restored many Caravan headlight lenses. I use a product called Crystalenz, it works great and is really easy to use. You DO NOT have to replace the lenses. Check out their website www.crystalenz.com for more info. for removal, see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
You have to unbolt the entire soft bumper and remove. The dealer did this on my car to replace the headlight assembly.
The headlights of a 2001 Dodge Caravan are aimed by turning the adjustment screws on the back of the headlight assembly. They allow for vertical and horizontal adjustments.
8mm
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
Under the passenger side headlight assembly, you have to remove the entire assembly to get to it.
The engine and transmission are removed out the bottom as an assembly.
Open hood, remove headlamp bulb from headlamp assembly, remove (1) 10mm bolt from top of headlamp assembly, next remove (3) 10mm bolts from behind headlamp assembly, pull headlamp forward ( you may have to pry gently from the right side). Remove turn signal bulb-Done!
I need to replace the bulb on the driver side of my 2003 Dodge Grand Caravan. After searching this forum I found a similar question regarding the 2000 Caravan. It talked about under the hood removing three screws and pulling out the headlight assembly. I tried this and it worked on the 2003. 1) open the hood. 2) Carefully remove the three screws holding the headlight assembly in place. In my case the screws were black. Be careful as they are screwed into plastic. 3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. 4) Carefully insert the headlight assembly back into place. 5) Replace the three screws removed in step 2 being carefull not to over tighten.
You must remove the 3 bolts on the opper part of the headlight housing and then remove the entire housing. You can then reach the bulb connection