Check out the mass air flow, probably dirty, clean VERY CAREFULLY with electrical contact cleaner or replace it if you feel wealthy. DON"T BREAK THE WIRE, DON"T USE A CLEANER THAT LEAVES A DEPOSIT ON THE WIRE. Both codes together lead to this but more diagnostics would't hurt. Try cleaning it first, a bottle of spray is about $5.00 (cheap starting point).
p0171 andpo174 mean that you're car is running lean
There are several possible causes for the engine codes P0136 and P0141. Some possible causes for P0136 are oxygen sensors, fuel injectors, or intake air leaks. Possible causes for P0141 are the engine control module and the oxygen sensors.
I'm not exactly sure about the 136 and 141 codes, but the 171 and 174 are symptomatic of a known problem with Windstar 3.8 litre engines. Those codes combined with rough idle are prime indicators of a leaking upper intake manifold involving worn out "isolator bolts". See "Related Questions" below for more
Trouble code P0171 means: System Too Lean (Bank 1)
p0401 is lack of egr flow p0171 is bank 1 lean So we have two problems that are commonly related, often accompanied by high idle that will not return to normal. With out high idle problem you may have a pluged EGR or Vacume leak at the EGR system. THe High idle is definately a clue that you have leak in the EGR system.
Not knowing what the following codes are will not allow someone to know which indicate an Oldsmobile 88. Information should be provided as to what the codes are.
It means system too lean. The best fix is a trip to someone who has an OBDII scan tool so that they can accurately troubleshoot the problem. The Sportage is notorious for false sensor readings and bad DTC (Diagnostic Trouble Codes).
Trouble code P0171 means: Fuel Trim System Lean (Bank 1) Trouble code P0174 means: Fuel Trim System Lean (Bank 2)
Trouble code P0171 means: Fuel Trim System Lean (Bank 1) Trouble code P0174 means: Fuel Trim System Lean (Bank 2)
Trouble code P0171 means: Fuel Trim System Lean (Bank 1) Trouble code P0300 means: Multiple Cylinder Misfire Detected
There are an unbelievable number of errors listed. Your best bet is to visit the Microsoft Support Center to find out what they are and to troubleshoot them.
Get a can of mass air flow sensor cleaner and clean the maf sensor