The door push-pins are suppost to be on the door panel. When ready to install those push-pins are inserted inside the door holes. Push them in until you hear a click. After that reinstall the door handle and srews. exc.
The door panel on a 2002 Honda Civic is held on by several mounting screws and clips. Remove the mounting screws first, then pull the panel off. The remaining clips will just pop off.
The 2002 Toyota rear door panel is held in place by six retaining clips. Pry outward on each retaining clip to remove the door panel.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Remove the door panel by carefully lifting the panel upward to release the retaining clips. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
The 2002 Chevrolet Astro Van passenger door panel is held in place with two retaining screws and eight retaining clips. Remove the retaining screws and pry outward on the retaining clips.
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
The 2002 Pontiac Bonneville rear door panel is held in place by eight retaining clips and two screws. Remove the screws that can be found near the door handle. Pry outward on each retaining clip to remove the door panel.
Using a screw driver, remove all of the screws and the clips from the panel of the car. Pull the panel away gently, remove any wire connectors, and then pull the panel off the door.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
A door panel on a 2005 Hyundai Accent is mounted with screws and clips. Loosen all the mounting screws. Pull the panel outward and pop out the clips. Remove the door panel.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.