Want this question answered?
Open the bonnet, remove the scuttle cover, wiper motor, and finally blower motor.
Blower is a dual squirrel cage unit located under the wiper arm assembly. You will need to remove this and the engine bay fire wall center section to gain access.
== ==
A Mercedes 190e doesn't have a carburetor. They are fuel injected.
By using a tool box open the location and remove it to replace it with a new one
You can order the part at carpartsdiscount.com installation is easy. Just remove the clamps remove the hose replace the clamps with the new hose.
how remove cylinder head
You have to remove the wood trim panel that covers the shifter.Then the bulb socket pulls out of the front end of the shifter.Pull the socet out and replace the bulb.
my 1993 190E 2.3 is doing the same thing. just replace the switches...they tend to not last
Remove the inside door panel from your Mercedes-Benz. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
oil filter on a Mercedes 190E 1986 is in the back of engine
On my 1984 190E, it is simple - there are a couple of tabs at the bottom of the back seat (where your heels would be if you were sittng), you have to look, the seat will pull right out!