Push in on the bottom of the seat front and then lift.
Move seat fully forward, remove side trim, remove seat belt retaining bolt, remove seat tracks rear bolts, flip seat upwards, disconnect wiring, remove seat.....
First you should move the seat completely forward. Then, remove the side trim, the bolt that holds the seat belt in place, and the rear bolts. Finally, lift seat, disconnect the wires and remove the seat from vehicle.
Remove lower seat bottom. Remove two bolts from bottom of seat back. Lift seat back off of its hooks. Remove from car. Use Philips screwdriver to remove 4 screws holding speaker grille to seat back frame.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do you remove the rear seat on a 2002 diamante
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
remove the 2 bolts on the floor in front of the seat, and the 3 bolts on the floor at the rear of the seat.
you must remove the bolt behind the rear seat and remove the rear seat then you will see 2 small Allen head bolts remove them and the seat will come right off.
You need to remove the rear seat before you can removed the front. First removed the one screw on the back of the rear seat then removed the two screws on the front of the rear seat. You can not get to the front screws until you remove the rear screw.