Want this question answered?
Initially,remove the battery earth lead for a minute,have your radio code ready to reset the radio.If this doesn't work you may need a garage to reset with a diagnostic computer,or confirm a faulty sensor.
Go to your local Auto zone they will read it for free. If there are no faults they will reset it if it has faults they will tell you what to fix.
Hold the speedo reset buton down when tirning on ignition after about 30 seconds it will reset.
There is no tire pressure warning manual reset for the Astra. Make sure that the tires are properly inflated, and let the engine run for about 10 minutes. If the system is working correctly, then it will reset itself.
hold down the mileage reset then turn ignition on and until the InsP turns to ---- let the reset go and walla you can start the car or turn the ignition off This works on my Corsa, think the same instrument panel is in the astra Not sure if anyone knows but you can reset your service inspection lamp on your Vectra C, Astra H and Corsa C & D with out the aid of any diagnostic tools. Simply press the trip reset button on the dash at the same time press the brake pedal then switch on the ignition, keep brake and trip pressed for 10 to 12 seconds and hey presto its done!! If you already knew that i will go back and crawl into my shell
The spanner comes up to indicate that the car is due for a service. It should be reset by the garage after the service is carried out.
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
foot on brake , hold trip reset in and turn on ignition after 10 seconds insp will reset then you can release all!
If it is the same as the 2002 model you hold the button in and keep it held in for 5 seconds after the window fully decends then hold it in until it is fully up and keep hold for 5 more seconds then it should be reset
To reset the ECM on a 2004 VW Beetle an diagnostic tool should be used. Plugging the unit directly to the diagnostic tool will allow a user to directly reset the computer.
Airbag light can only be reset using diagnostic equipment.
The diagnostic code should go off when the issue is fixed. You can try disconnecting the battery for a few minutes. Also, it can be reset through a code reader.