0
remove the bolts holding it to the water pump pulley, then wiggle the fan out under neath the radiator hose ( or take it off if you like) there will be 4 bolts on the front of the fan holding on the fan clutch. good luck!
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you remove the fan clutch on a 2001 Ford Ranger?
you have to have fan clutch wrenches
How do you replace a fan clutch on a 2003 Ford Explorer?
How to remove fan clutch on 2003 ford explorer
How do you remove fan from 1993 ford econoline e150 4.9liter 6 cylinder?
You need to rent or buy a fan clutch removal tool kit. you need to remove the fan and clutch as one before you can separate the fan from the clutch.
How do you remove clutch fan from 1993 explorer?
to remove a clutch fan on a ford, you need special tools . also fan thread is left hand thread ,so you unscrew it clockwise
How do you remove fan clutch of a 1985 buick regal?
Remove the fan itself then remove the clutch from the fan
How do you remove the fan clutch on 1999 turbo diesel ford van?
by use of fan cluthc wrench ( air hammer)
How do you remove the fan clutch on a 1995 Ford Econoline Van?
Some vans don't hav a fan clutch but electric fans. If yours does have one, simply remove the 4 bolts holding the fan on then take the bolts out of the clutch. If it has just one big nut a special tool is required.
How do you remove clutch fan on a Ford F-250?
To remove the clutch fan on these Fords you will need to get a specialized tool from your local auto parts store. This tool allows to hold the water pump retaining bolts, then use a 1 7/8 wrench on the clutch fan. Check your belt routing label. This will tell you if your fan clutch is left hand thread.
How do you remove the clutch fan on a 1993 Ford F-250 so the water pump can be replced?
AnswerTo remove the clutch fan, undo the bolts that hold it on. Then take a puller and pull it of the shaft. Then you can get at the water pump. Also remember that the fan shroud has to come out first. A fan clutch wrench set would help you.
How do you replace the fan clutch on a 1999 Tahoe?
Remove the fan belt, by loosening the tensioner pulley. Remove the fan clutch with the retaining bolts. Reverse the process to install the new fan clutch.
How do you change a clutch fan in a 1997 Ford Aerostar?
First remove the accessory drive belt- then loosen the large nut that attaches the fan clutch assembly to the water pump pulley being careful to loosen the nut clock wise not counter clockwise (It is a left handed thread)-now you can remove the fan to clutch bolts so you can separate the clutch assembly from the fan.
How do you remove a fan clutch on a Chevy Tahoe?
To remove the fan clutch on a Chevy Tahoe, the upper fan shroud must first be removed. Once removed, a tool is needed to hold the clutch in place to allow for the fan to be removed. The nuts must be unscrewed on the fan in a counterclockwise rotation. Remove the nuts on all side and the fan clutch will remove.
