Want this question answered?
how do you repair an inner tie rod for a 96 Pontiac sunfire no repair,replace with new.
Inner or outer?
how due you vhange a inner and outer tie rod on a 2001 Chevy Monte Carlo
how to replace a tie rod on a 2002 chevy calivier with a 2.2 motor?
There are two types of tie rods on a 2000 Dodge neon. The outer-tie rod connect to the inner-tie rods which mount to the steering rack. The outer units are threaded on to the inner- tie rods. Remove them by spinning it counter clockwise. Take a special tie rod socket to remove the inner-tie rod. Replace the units.
Remove wheel and properly support vehicle. Loosen bolt that olds outer tie rod. Disconnect outer tie rod from steering knuckle (Always use safety glasses when striking a hammer). Remove outer tie rod and count how many turns it took to remove. Remove inner tie rod boot. Use inner tie rod tool to remove inner tie rod (you can turn steering wheel so tie rod is easier to reach). Replace with new part. Properly install inner tie rod boot. Install outer tie rod and turn it as many times as it took to remove (this will help with alignment). Properly install outter tie rod and use a new cotter pin. Put wheel back on and get an alignment.
Lift and support the vehical remove weel disconnect outer tie rod from the steering knuckle remove inner tie rod boot from the rack then remove the tabed lock washer then unscrew the inner tie rod from the rack with the correct tool or a big pair of channel locks and a hammer
Inner tie rod end 185.00 with labor outer tie rod end 165.00 with labor plus alignment
Take it to a garage as you need special tools and the alignment has to be set when you replace them.
hey, take the bolts loose but dont loose the adjustment
remove cotter pin from castle nut on outer tie rod end. loosen from threads enough to mark threads for replacement. pull and remove ball socket.. remove boot inner boot clamp from inner tire rod rod. unbolt tie rod using special tool supplied by auto parts store. thread in inner tie rod end. reinstall boot using plastic tie or adjustable clamp. reattach rod to outer tie rod end.
Inner Handle Rod Inner Handle Rod