Code is 1 1 1 1. Enter the numbers using the radio selection push buttons. First buton is 1st number, 2nd button is 2nd number, 3rd button is 3rd number, 4th button is 4th number. One push of the first button will enter a 1 (2 pushes a 2,etc.) So...just push the 4 side by side butoons 1 time each and the code 1111 will enter on the screen. Then push the volume button and you are all done.
You cannot enter the radio code on a 2005 KIA Sportage if the screen is blank. You have to fix the screen. How do you fix the screen?
You insert the code with the radio presets. Just push the reset # that corresponds to the radio preset. If you have locked the radio up just leave it on for a few hours and it will reset so you can enter the code again.
I am 99% sure this can only be done by the manufactures of the vehicle try taking it down to a local dealer.
Power the radio, and then enter the anti-theft code using the preset numbers at the bottom of the radio. If the anti-theft code is unknown, contact Honda with the 17-digit vehicle identification number.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3
try this and lemme know! http://www.kia-forums.com/other-kia-models/31540-kia-mentor-immobiliser-2.html dl@telkomsa.net
the radio wil blink "code" enter the code and then push "ok" the radio should come back on unless you have attempted to enter the incorrect code too many times- in this case you will have to wait for the radio to reset itself (this can take anywhere from 10 min to 5 days.
Best bet is to go to an Audi/VW dealership, and have them reset the radio by using a VAGCOM. The other option would be to purchase a VAGCOM yourself (http://www.ross-tech.com/). Of course if you have the actual reset code, you can enter it in manually. I can't tell you specifically how to enter it on the Audi radio, since I have an Audi Navigation system, and the controls are different. But it should be a combination of using Volume and Seek (or other keys the would allow for scrolling) to enter in the code.
No, except on some vehicles you must enter a code in the radio in order for it to work.
What worked for me was to unplug the antenna in the back of the radio and then enter the security code. Once the security code is entered, you can plug the antenna connector back into the radio.
Howdo i reset my radio security code ml 500 2002
on the comand for radio enter your code