0
The GrandAm has an automatic belt tensioner built in. Loosening the belt manually would not be feasable without the removal of the belt tensioner at which point the belt would no longer fit.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you loosen the serpentine belt tension on a 2005 grand caravan 3.8L?
To loosen the tension on a serpentine belt on a 2005 Grand Caravan 3.8L, turn the nut of the belt tension pulley to loosen it. Adjust the belt, then tighten the tension pulley by turning the nut in the opposite direction.
WHAT PULLEY DO I loosen to get single drive belt on?
If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.
Loosen tension on serpentine belt on a 2000 jeep Cherokee sport?
Loosen bolt in tension pulley, then loosen tension bolt. Replace belt. Tighten tension bolt. Last, tighten bolt through pulley.
How do you loosen tension on a 95 blazer for serpentine belt?
If it
How do you loosen tension on a 2000 jeep grand Cherokee serpentine belt to replace the alternator?
Ajustment bolt is located at the bottom of power steering pump.
How do you replace the alternator on a 95 grand am gt?
loosen the tension on the belt with the tension pulley, remove the belt then disconnect your wires from the alternator then take the 3-4 bolts, holding the alternator on, off. then do the opposite to put the new one back on
How do yow loosen and tighten a belt you see the tension mount roller with one bolt?
Loosen lock nut, turn tension bolt.
How do you replace the cerpentine belt on a 2003 Mitsubishi eclipse?
Loosen the central nut of the belt tension pulley. Loosen the tightening bolt. Remove the belt, install a new one. Set proper tension. Tighten the central nut.
Is there a special tool for the tension on a2005 dodge 3.3 serpentine belt?
the idler pully makes the tension. to remove belt you use a wrench push tensioner in a direction that would loosen the belt as if you were trying to tighten or loosen the bolt holding the pulley on. carefull high tension.
How do you loosen the tension on the belt for the altinator?
how do u lossen the altinator belt on a 91 honda accord
How do you loosen drive belt on 1989 Nissan 240SX?
loosen the bolt in the center of the drive belt pulley, then loosen the bolt on the side of the pulley. as you loosen the side bolt the tension lets up
How do you adjust the alternator belt tension on diamante?
Loosen the alternator tensioner bolt. You will be able to slide the alternator either way to adjust the tension on the belt.
