answersLogoWhite

0

What else can I help you with?

Related Questions

How do you loosen the serpentine belt tension on a 2005 grand caravan 3.8L?

To loosen the tension on a serpentine belt on a 2005 Grand Caravan 3.8L, turn the nut of the belt tension pulley to loosen it. Adjust the belt, then tighten the tension pulley by turning the nut in the opposite direction.


WHAT PULLEY DO I loosen to get single drive belt on?

If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.


Loosen tension on serpentine belt on a 2000 jeep Cherokee sport?

Loosen bolt in tension pulley, then loosen tension bolt. Replace belt. Tighten tension bolt. Last, tighten bolt through pulley.


What tool do you use to loosen the serpentine belt tension pulley on 2002 jeep wrangler v6?

A ratchet isÊneeded to loosen the serpentine belt tension pulley on a 2002 Jeep Wrangler V6. It will require a 1/2 inch ratchet.


How do you loosen serpentine belt tensioner on 93 Chevy silverado?

To loosen the serpentine belt tensioner on a 1993 Chevy Silverado, you'll need to use a wrench or ratchet on the tensioner bolt. Turn the tensioner counterclockwise to relieve tension on the belt. Once the tension is relieved, you can remove the serpentine belt from the pulleys. Make sure to note the belt routing for reinstallation.


Where is the tension release for the alternators belt?

If it is a drive belt and not a serpentine belt is has no tensioner. You manually adjust the tension by normally adjusting tension by moving the alternator. Loosen to bolts holding the alternator in place and then adjust the tension. Tighten the bolts when the tension is right. If it is serpentine belt if you follow the belt around the the engine you will see the tensioner.


How do you change the serpentine belt 97 Mitsubishi diamante?

Changing the serpentine belt on a 97 Mitsubishi Diamante is a fairly easy task. All you need to do is get a wrench and loosen the tension pulley and pull of the serpentine belt.


How do you loosen the serpentine belt in a 91 LeBaron?

the Serpentine Belt on the 91 Lebaron is on Tension Pulley, you dont tighten it. But if it is loose and you need to tighten it you just go and buy a new belt and put that on.


Is there a special tool for the tension on a2005 dodge 3.3 serpentine belt?

the idler pully makes the tension. to remove belt you use a wrench push tensioner in a direction that would loosen the belt as if you were trying to tighten or loosen the bolt holding the pulley on. carefull high tension.


How do you loosen the serpentine belt on a 2002 Kia Sedona?

You could do what I did, wait for the tension pulley to fall off the van...


How do you loosen the belt tensioner on a serpentine belt on a 1989 Plymouth acclaim?

To loosen the belt tensioner on a 1989 Plymouth Acclaim, locate the tensioner pulley, which is typically mounted on the front of the engine. Use a wrench or a ratchet with the appropriate socket to turn the tensioner pulley counterclockwise, which will relieve tension on the serpentine belt. Once the tension is released, you can remove the belt from the pulleys. After replacing or adjusting the belt as needed, release the tensioner to reapply tension to the new belt.


How do you loosen the tension for replaceing serpentine belt on 93 Cherokee?

You pry it over enough to remove the belt. You loosen the tensioner pulley bolt and thread the adjuster bolt backwards on a 4.0L.