Remove cables from battery Remove + cable from the starter solenoid Remove the - battery cable from engine ground install new cables using the same routings as original
Take both cables off. Remove old battery. Put new battery in. Put cables back on.
Disconnect and remove existing cables Replace with new cable using the routing used by original cables + from battery to starter solenoid - From battery to good engine ground
Set car on fire, call insurance agent.
Loose cables, bad battery, alternator or starter.
Disconnect the battery, remove the cables and boots, and remove the old spark plugs. Put in the new spark plugs, attach the cables and boots, and connect the battery.
how to replace water pump on 2001 ford ranger
how to replace u-joints on 1995 ford ranger 2wd
when you unhook the battery the computer probably resets itself.
Just simply remove mounting bolt and cables and remove old battery under hood. There may also be a battery under the passenger side mounted to the frame. You will need to remove the bolts holding battery case to frame. There are cables to prevent battery case and battery from falling. Once dropped done, remove both cables and mounting bolt for battery. Remove old battery and replace with new.
how do i replace a throttle cable on a 1988 ford ranger pickup
yes
Replace the starter solenoid which is attached to the positive battery cable. Also clean both battery cables and inspect the cables while you are cleaning them.