Many auto parts stores will provide that service for you for zip if you purchase the parts needed to fix the problem from them. That same auto parts store can also sell you a scanning device to read them yourself for under $100. This would be a very basic tool for reading the codes. The tool should come with a booklet that lists the codes and what they mean.
Some Haynes manuals have ECU codes
If it is OBD 1, yes.
1994 year and up need a code reader to retrieve their codes. Most auto parts stores offer this as a free service.
You need an OBDII scanner to retrieve the trouble codes.
Trouble code PO151
the stereo in my 2000 Chevy Malibu is in lock mode and i don't know the codes, how do i unlock it?
if you are looking to reset a check engine light or any trouble codes, you will need to have it done with an OBD2 handheld scanner.
A malfunction in either the performance or emmissions system has been detected. Have your vehicle scanned with an OBDII scanner to retrieve the trouble codes. AutoZone and other parts stores will scan free of charge if the check engine light is lit.
One of the sensors detected a fault that occurred at least 2x, but there are about 100 different ones. you need to retrieve codes from car's comp with a code reader
96 on up you need a scanner, you can buy 1 at the auto parts place for around 100.00 dollars. actron hand held scanner to retreive trouble codes.
The OBDII system is used in 1995 and later model vehicles. An OBDII scanner must be used to retrieve the trouble codes.
You will need a diagnostic scanner to retrieve the codes.