There was a time when I and most people changed their own tires, but today, most tires have lugs nuts tightened by machine and are extremely hard for the average person to loosen by hand. But if you are up to it, it is a relatively simple procedure. You will need a good tire on a rim to replace the old tire, an auto jack, and a lug nut wrench. Below are two links on "how to change a tire". The first is a simple step by step procedure, the second is a step by step with additional safety information that should also be read before attempting to change a tire in a roadside setting.
Park vehicle on level ground Block the wheel opposite the one you are changing Set parking brake Jack vehicle at approved support points just to the level where the weight is off the tire, but tire is still on the ground Loosen but do not remove lug nuts Raise vehicle so wheel is off the ground Remove lug nuts Remove tire Install in reverse order
To change an actual tire you need a tire machine to get it off the rim and the new one on. -If you mean the change the WHEEL and tire on a car, then you just need a jack and a tire wrench.
how do you change the tire on a lexus gs 300?
how to change a spare tire on a hyundai tiburon
How do you change a tire on a 2000 chevy suburban
A change in overall tire height will change speedometer accuracy.
No, you have to buy a wider tire.
No, you change it like any other tire.
sell the car you shouldn't be around it if u cannot change the tire
To change a front tire, place the jack directly behind the tire. To change a back tire, place the jack directly in front of it. Try to get the jack under the tire axis.
The internal pressure increase in the tire.
Change rear tire on c-3 yamaha scotter
How do you change front tire studs on a 1994 Seville sts