There are 2 plastic straps on the back side of the head light assembly which are held in place by a 5/16" nut. Simply loosen the bolts on both straps about 2 full turns, remove the straps by pulling upward then out, and bring the head light assembly forward to access and remove the light bulb assembly. Note that the light bulb assembly includes a plug. Simply unplug the entire assembly. Do not attempt to remove the light bulb and try not to touch the new bulb assembly with your hands when replacing it.
The vehicle with 16 rims that can fit the 1999 Sonoma is Chevrolet siverado.5stud 4.75 ??? The vehicle with 16 rims that can fit 1999 Sonoma is a Toyota truck.
unhook the battery for 5 mins if problem is fix the light will go off
An instructional video on how to take a door panel off a 1999 Sonoma can be view on YouTube. Search for "How to remove door/door panels 1999 Sonoma/s10" and click on the first search result.
there is no cut off switch on a 1999 gmc sonoma
The one that lights the outside edge, a marker light to be seen from the side
how do you change the rear license plate light on a 1999 Buick Regal
if it is anything like the 1995, there are two threaded knobs on the top of the light assembly that you unscrew completely off. the head light assembly then can be moved out so that you can access the back to change the bulb
tbi(throttle body injection) is not used on the 99' sonoma 2.2
There is no change transmission lamp.
Under
you will probably need to open the trunk, remove corner of carpet behind the light along with any plastic or metal being the taillight. then there should be a little pannel you can take off to get access to the light.
yes