answersLogoWhite
Antifreeze and Engine Coolant
Chevy Corsica
Chevy Lumina

How do you add coolant to Corsica?

343536

Top Answer
User Avatar
Wiki User
Answered 2006-08-21 04:53:08

Remove Your Radiator Cap, If It Is Full OK. If Not Add Until It Is Full. Put Cap Back On. Now Fill Your Colant Reservoir. To The Cold Level. P>S> Be Sure Engine Is Cold When You Do This.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions




fill the radiator to the top with 50/50 water and antafrezz


Place something to catch the engine coolant beneath your 1990 Chevy Corsica radiator. Remove the radiator drain plug with a 9/16 ratchet. The engine coolant will drain out.


how to add coolant to 1991 lumina?


If the coolant fan does not operate on a Chevy Corsica, it is likely that a fuse is out. There could also be a mechanical defect in the fan or wiring.


The overflow resavour is where you add coolant


You add coolant to a C240 at the radiator overflow tank. This allows the radiator to suck in coolant as needed when hot.


Mine does not. Perhaps you a low on coolant.


Air conditioner coolant? You mean freeon.. To add freeon you have to remove the usually red. Then go get a small bottle. (you cannot buy a large quanity without a license). The cap will be above the ac fan on your front end unscrew it, thne screw the bottle on, fill then remove. Quite eaisly.


You should not mix colors or brands of coolant.


My 96 corsica does the same thing, so maybe this will help: I have a small coolant leak, and I have to put more antifreeze in quite regularly. when my coolant level is too low, my heat stops working. try checking your coolant levels, remember to use universal or dexcool.


no cap, just the coolant tank, add to this to add coolant../


Add coolant to the full cold line on the coolant reservoir when engine is cold.


The coolant add/overfill jug is on the left side of the motor when your looking at it. Add coolant up the closest line towards the top, and only when the engine is cold.


First off, if you are having to add coolant, then you have a leak that needs to be repaired. Add coolant on a cold engine by removing the radiator cap and filling the radiator to the top. Fill the recovery reservoir to the cold full mark. Start the engine and let it run until no air bubbles are present. Replace the cap, and drive the car for at least 10 miles. Check the recovery tank level and add to the full hot mark.


Radiator. Remove the cap and add coolant there.


you add coolant untill it is full ?


You should add coolant with the engine off and cool, top off the radiator and fill the coolant reservoir to the cool or cold level. When the system is hot or running it will be pressurized and will be dangerous to open. You can however add coolant to the overflow reservoir at any time.


Add it in the overflow tank up to the max line.



There is no such thing as Air Conditioning coolant.


were do I put coolant in mercedes 1994 c280


Coolant for the 98 Deville is added into the coolant overflow bottle. The side of the bottle should have low and high coolant markings.


add coolant to f250 system thru the overflow bottle this is a plastic bottle under the hood make sure not to add to window washer bottle



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.