Add it through the engine oil only cap. on top of the engine. Remove the cap and use a funnel. Add four - five quarts depending on the engine size. Good luck.
Remove the fill cap and add it at the brake fluid master cylinder reservoir. Located on or near the master cylinder.
add r134a to the service port
Low side.Low side.
The bottle on the firewall with the radiator cap on it is where you add coolant.
how to add oil to the engine of a c230 2005 Meredes Benz? Need a diagram of engine
just found the answer it is mopar frictionmodifier additive
they take five quarts usually for more accurate information check ur owners manual. or call the jeep dealer. If that doesnt work for you, add 4.5 quarts start the engine turn it off after a few seconds and check the dipstick. if its not to the full line, add accordingly usually a little bit at a time.
Through the cap in the middle of the valve cover.
When you add engine coolant to a 2003 Jeep Grand Cherokee because the low coolant indicator has come on, you should add to the reserve tank and the radiator if they are low. Sometimes, just the reserve tank needs filled.
To install the tubular side step on the Jeep Liberty, first remove the bolts and the running boards if the vehicle has them. Then, install the side step with the mounting brackets included. You might need to drill into the frame of the vehicle to place the bolts for the brackets. Then, add the step which bolts to the mounting bracket.
From an auto zone I was told 4.75 quarts for a 2005 santa fe 2.7liter engine. That's how much to add during an oil change.
Yes